# Copyright 3D Control Systems, Inc. All Rights Reserved 2017-2019.

# Built in San Francisco.

# This software is distributed under a commercial license for personal,
# educational, corporate or any other use.
# The software as a whole or any parts of it is prohibited for distribution or
# use without obtaining a license from 3D Control Systems, Inc.

# All software licenses are subject to the 3DPrinterOS terms of use
# (available at https://www.3dprinteros.com/terms-and-conditions/),
# and privacy policy (available at https://www.3dprinteros.com/privacy-policy/)

import getpass
import logging
import platform
import pprint
import signal
import subprocess
import sys
import threading
import time
import traceback
from collections import OrderedDict

import config
import log
import paths
import platforms
import version

try:
    import rights
except ImportError:
    rights = None

from dnsmasq_detector import DNSMasqDetector
from no_subproc_camera_controller import NoSubprocCameraController
from printer_interface import PrinterInterface
from static_and_stored_detect import StaticDetector
from user_login import UserLogin

if 'slave_app' not in sys.modules:
    try:
        from camera_controller import CameraController
        from client_scanner import ClientScanner
        from detection_wizard import DetectionWizard
        from gpio_uart_detect import GPIOUARTDetector
        from host_commands_interface import HostCommandsInterface
        from klipper_detect import KlipperDetector
        from local_moonraker_detector import LocalMoonrakerDetector
        from makerware_utils import ConveyorKillWaiter
        from network_detect import NetworkDetector
        from plugin_controller import PluginController
        from rights import RightsChecker
        from tray_controller import TrayController
        from updater import Updater
        from usb_detect import USBDetector
    except ImportError:
        error = traceback.format_exc()
        print('Error: ' + error)
        try:
            with open(log.EXCEPTIONS_LOG_FILE, "a") as f:
                f.write("\n" + log.form_log_title() + time.ctime() + "\n" + error + "\n")
        except OSError:
            pass


class App:

    LOG_TIMESTAMP_PERIOD = 3600
    BROWSER_OPENING_DELAY = 2
    QUIT_THREAD_JOIN_TIMEOUT = 21
    LOOP_SLEEP_STEPS = 10
    WAIT_FOR_PRINTER_TIMEOUT = 6
    SLAVE_MODE = False
    NUM_THREADS_WARNING_THREASHOLD = 40

    HOST_COMMAND_HACK_PRINTER_ID = {'VID': 'HOST', 'PID': 'HOST', 'SNR': '0'}
    LOOPS_TO_SWITCH_HOST_COMMAND_INTERFACE = 5 # really would need x2+1 to enable/disable

    UNVERVOLTAGE_MESSAGE = "Undervoltage detected! This could cause instability. Please upgrade RPi's power supply or use powered USB hub to power cameras"
    UNVERVOLTAGE_GONE_MESSAGE = "Voltage normalized. Undervoltage gone"
    RPI3_AND_AARCH64_WARNING = 'Warning! RPi3 has a bug in aarch64 Linux kernel that causes several serial USB bugs.\n' \
                    'Those can make USB to hickup time to time losing your gcodes, ok responses and sometimes even cause network issues too.\n' \
                    'Please switch to ARMv7 OS image'

    def __init__(self):
        log_headers = ['Version: ' + version.full_version_string(),
                    'Platform: ' + platform.platform(),
                    'Operating system: ' + platform.system(),
                    'Python: ' +  sys.version]
        if platforms.MACHINE:
            log_headers.append('Machine: ' + platforms.MACHINE)
        if not hasattr(self, 'logger'):
            self.logger = log.create_logger(None, header=log_headers)
        self.logger.info('Starting 3DPrinterOS client...')
        for line in log_headers:
            self.logger.info(line)
        if sys.version_info < (3,7):
            self.logger.error('Sorry, but your Python is too old. Use Python 3.7+')
            sys.exit(2)
        self.settings = config.get_settings()
        self.platform_warnings_enabled = self.settings.get('platform_warnings')
        self.warnings = []
        self.check_cam_migration_settings()
        self.printer_profiels = []
        if self.settings['protocol']['encryption']:
            port_key_name = 'https_port'
        else:
            port_key_name = 'http_port'
        port = self.settings['protocol'].get(port_key_name, '')
        if port:
            port = ":" + str(port)
        self.logger.info('Cloud server: %s%s' % (self.settings['URL'], port))
        self.stop_flag = False
        try:
            self.init_config()
            self.init_basics()
            self.init_adv()
            self.init_main_loop()
        except Exception as e:
            self.logger.exception("Exception in App.init: " + str(e))
            self.quit()

    @log.log_exception
    def init_config(self):
        config.Config.instance().set_app_pointer(self)

    @log.log_exception
    def init_basics(self):
        self.detectors = OrderedDict()
        self.printer_interfaces = []
        self.printer_interface_lock = threading.RLock()
        self.printer_interfaces_ready = False
        self.host_commands_interface = None
        self.detection_wizard = None
        self.virtual_printer_enabled = False
        self.gpio_interface = None
        self.verbose = self.settings.get('verbose')
        self.stop_flag = False
        self.poweroff_flag = False
        self.restart_flag = self.settings['quit']['always_restart']
        self.invalid_usb_infos = []
        self.closing_status = []
        self.os_user_name = getpass.getuser()
        self.logger.info('Running as user: ' + self.os_user_name)
        self.offline_mode = self.settings.get('offline_mode', False)
        self.min_loop_time = self.settings['main_loop_period']
        self.volatile_printer_settings = {}
        self.volatile_printer_settings_lock = threading.RLock()
        self.host_commands_enabled = False
        if not self.settings['keep_print_files']:
            paths.remove_downloaded_files()
        paths.remove_cameras_file()

    @log.log_exception
    def init_adv(self):
        if self.platform_warnings_enabled:
            self.warnings.extend(self.get_for_platfrom_flaws())
        if rights:
            restart = rights.add_cacert_to_certifi()
            if restart:
                self.logger.warning('Scheduling a restart to apply a new certificate')
                self.restart_flag = True
                self.stop_flag = True
        signal.signal(signal.SIGINT, self.intercept_signal)
        signal.signal(signal.SIGTERM, self.intercept_signal)
        try:
            self.plugin_controller = PluginController(self)
        except NameError:
            pass
        try:
            self.rights_checker = RightsChecker(self)
        except NameError:
            pass
        try:
            self.conveyor_kill_waiter = ConveyorKillWaiter(self)
        except NameError:
            pass
        self.user_login = UserLogin(self, retry_in_background=config.get_settings()['pre_login_ui'])
        config.Config.instance().set_profiles(self.user_login.profiles)
        if self.settings['camera']["no_subprocess"]:
            self.camera_controller = NoSubprocCameraController(self)
        else:
            self.camera_controller = CameraController(self)
        self.updater = Updater(self)
        if not self.offline_mode:
            self.updater.start_checks_loop()
        self.client_scanner = ClientScanner(self)
        self.tray_controller = TrayController()
        self.detection_wizard = DetectionWizard(self)
        self.init_user_interfaces()
        try:
            with open(paths.JOB_STARTS, 'w') as f:
                f.write('')
        except OSError:
            pass
        # maintain detectors order, so that KlipperDetect can disable USBDetector before it will run detect
        for detector_class in (GPIOUARTDetector, LocalMoonrakerDetector, KlipperDetector, USBDetector, NetworkDetector, StaticDetector, DNSMasqDetector):
            self.detectors[detector_class.__name__] = detector_class(self)
        self.logger.info('Detectors: ' + pprint.pformat(self.detectors.keys()))
        if self.settings['web_interface']['browser_opening_on_start'] and self.settings['pre_login_ui']:
            self.open_browser()
        if self.user_login.wait() and self.rights_checker.wait() and self.conveyor_kill_waiter.wait():
            if self.settings['web_interface']['browser_opening_on_start'] and not self.settings['pre_login_ui']:
                self.open_browser()
            self.camera_controller.start_camera_process()
            config.Config.instance().set_profiles(self.user_login.profiles)
            virtual_printer = self.settings['virtual_printer']
            self.virtual_printer_enabled = virtual_printer['enabled']
            self.virtual_printer_usb_info = dict(virtual_printer)
            del self.virtual_printer_usb_info['enabled']
            self.host_commands_enabled = self.settings.get('host_commands')

    def init_main_loop(self):
        try:
            self.main_loop()
        except Exception as e:
            self.logger.exception("Exception in main_loop: " + str(e))
        finally:
            self.quit()

    @staticmethod
    def open_browser(force=False):
        logger = logging.getLogger()
        if force or config.get_settings()['web_interface']['browser_opening_on_start']:
            address = "http://%s:%d" % (config.LOCAL_IP, config.get_settings()['web_interface']['port'])
            logger.info("Opening browser tab %s" % address)
            import webbrowser
            webbrowser.open(address, 2)
        else:
            logger.info("Browser opening prevented by settings")
    
    @property
    def local_ip(self) -> str:
        http_connection = getattr(getattr(self, "user_login", None), "http_connection", None)
        if http_connection:
            return http_connection.local_ip
        return ""

    @property
    def host_id(self) -> str:
        http_connection = getattr(getattr(self, "user_login", None), "http_connection", None)
        if http_connection:
            return http_connection.host_id
        return ""

    @property
    def macaddr(self) -> str:
        http_connection = getattr(getattr(self, "user_login", None), "http_connection", None)
        if http_connection:
            return http_connection.macaddr
        return ""

    def check_cam_migration_settings(self):
        if self.settings.get('cam_number_migration_success'):
            self.settings['camera']['old_ip_numeration'] = False
            del self.settings['cam_number_migration_success']
        config.Config.instance().save_settings(self.settings)

    def init_user_interfaces(self):
        if platforms.get_platform() == 'rpi':
            if self.settings['gpio']['enabled']:
                import gpio_interface
                if gpio_interface.GPIOInterface:
                    self.gpio_interface = gpio_interface.GPIOInterface()
        if self.settings['web_interface']['enabled']:
            import web_interface
            self.web_interface = self.init_user_interface(web_interface.WebInterface)
        if self.settings['qt_interface']['enabled']:
            try:
                import qt_interface
            except ImportError:
                self.logger.error("Error on import of qt_interface - disabling it")
            else:
                self.qt_interface = self.init_user_interface(qt_interface.QtInterface)

    def init_user_interface(self, interface_class):
        interface = interface_class(self)
        interface.start()
        self.logger.debug("Waiting for %s to start..." % str(interface))
        interface.wait()
        self.logger.debug("...interface %s is up and running." % interface_class.__class__.__name__)
        return interface

    def intercept_signal(self, signal_code, frame):
        self.stop_flag = True
        self.restart_flag = False
        # using print or log call here can now(Python3.14) cause RuntimeError: reentrant call inside <_io.BufferedWriter name='<stdout>'>
        #self.logger.warning("SIGINT or SIGTERM received. Starting exit sequence")
        if not self.printer_interfaces_ready:
            self.stop_flag = True
            self.quit()

    def toggle_virtual_printer(self):
        self.virtual_printer_enabled = not self.virtual_printer_enabled
        self.settings['virtual_printer']['enabled'] = self.virtual_printer_enabled
        config.Config.instance().save_settings(self.settings)

    def get_printer_interface(self, index=0):
        with self.printer_interface_lock:
            try:
                if self.printer_interfaces:
                    return self.printer_interfaces[index]
            except (IndexError, AttributeError):
                pass

    def wait_for_printer(self):
        time_left = self.WAIT_FOR_PRINTER_TIMEOUT
        step = 0.01
        while not self.stop_flag and time_left:
            time.sleep(step)
            if self.printer_interfaces_ready:
                return True
            time_left -= step
        return False

    @log.log_exception
    def main_loop(self):
        last_timestamp_time = 0
        host_commands_interface_enabling_weight = -2
        prev_undervoltage_state = None
        while not self.stop_flag:
            loop_start_time = time.monotonic()
            if self.platform_warnings_enabled:
                undervoltage_state = platforms.undervoltage_detected()
                if undervoltage_state != prev_undervoltage_state:
                    if undervoltage_state:
                        if self.UNVERVOLTAGE_MESSAGE not in self.warnings:
                            self.warnings.append(self.UNVERVOLTAGE_MESSAGE)
                            for pi in self.printer_interfaces:
                                pi.register_error(7001, self.UNVERVOLTAGE_MESSAGE, job_fail=False, disconnect=False)
                    elif prev_undervoltage_state is not None:
                        if self.UNVERVOLTAGE_GONE_MESSAGE in self.warnings:
                            self.warnings.remove(self.UNVERVOLTAGE_GONE_MESSAGE)
                        for pi in self.printer_interfaces:
                            pi.register_error(7001, self.UNVERVOLTAGE_MESSAGE, job_fail=False, disconnect=False)
                prev_undervoltage_state = undervoltage_state
            detected_printers = []
            if self.virtual_printer_enabled:
                detected_printers.append(self.virtual_printer_usb_info)
            conflicts = set()
            if self.detection_wizard and self.detection_wizard.active:
                active_detectors = {}
            else:
                active_detectors = config.get_settings()['active_detectors']
            for detector_name in self.detectors:
                if active_detectors.get(detector_name):
                    if detector_name not in conflicts:
                        printers = self.detectors[detector_name].get_printers_list()
                        if printers:
                            detected_printers.extend(printers)
                            conflicts.update(self.detectors[detector_name].CONFLICTS)
            self.connect_new_printers(detected_printers)
            for pi in self.printer_interfaces:
                if not pi.is_alive():
                    pi.close()
                    self.logger.info('Removing %s from printers list' % pi)
                    with self.printer_interface_lock:
                        self.printer_interfaces.remove(pi)
                elif pi.usb_info not in detected_printers:
                    pi.register_error(99, "Printer connection lost", job_fail=False, close=True)
                    self.logger.info("Printer connection lost " + pi.id_string)
                    pi.close()
                elif pi.usb_info.get('OFF', False):
                    pi.register_error(98, "Printer has been disabled", job_fail=True, close=True)
                    self.logger.info("Printer has been disabled " + pi.id_string)
                    pi.close()
            if not self.printer_interfaces_ready:
                self.printer_interfaces_ready = True
            if self.gpio_interface:
                self.gpio_interface.check_events(self.printer_interfaces)
            if self.host_commands_enabled:
                if any((not pi.forced_state for pi in self.printer_interfaces)):
                    if host_commands_interface_enabling_weight > -self.LOOPS_TO_SWITCH_HOST_COMMAND_INTERFACE:
                        host_commands_interface_enabling_weight -= 1
                    if host_commands_interface_enabling_weight < 0:
                        if self.host_commands_interface:
                            self.stop_host_commands_interface()
                else:
                    if host_commands_interface_enabling_weight < self.LOOPS_TO_SWITCH_HOST_COMMAND_INTERFACE:
                        host_commands_interface_enabling_weight += 1
                    else:
                        if not self.host_commands_interface:
                            self.start_host_commands_interface()
            loop_end_time = time.monotonic()
            if loop_end_time > last_timestamp_time + self.LOG_TIMESTAMP_PERIOD:
                self.logger.info(time.strftime("Main loop: %d %b %Y %H:%M:%S", time.localtime()))
                last_timestamp_time = loop_end_time
                self.logger.info("Threads count: " + str(threading.active_count()))
            sleep_time = loop_start_time - loop_end_time + self.min_loop_time
            if sleep_time > 0:
                steps_left = self.LOOP_SLEEP_STEPS
                while steps_left and not self.stop_flag:
                    time.sleep(sleep_time/self.LOOP_SLEEP_STEPS)
                    steps_left -= 1

    def validate_usb_info(self, usb_info):
        if isinstance(usb_info, dict):
            vid = usb_info.get('VID')
            pid = usb_info.get('PID')
            if pid and vid and isinstance(vid, str) and isinstance(pid, str):
                return True
        if usb_info not in self.invalid_usb_infos:
            self.invalid_usb_infos.append(usb_info)
            self.logger.error("Invalid printer info: " + str(usb_info))
        return False

    def connect_new_printers(self, detected_printers):
        currently_connected_usb_info = [pi.usb_info for pi in self.printer_interfaces]
        for usb_info in detected_printers:
            if usb_info not in currently_connected_usb_info:
                if self.validate_usb_info(usb_info) and not usb_info.get('OFF', False):
                    pi = PrinterInterface(self, usb_info,
                                          config.get_settings()['printer_loop_period'],
                                          self.offline_mode)
                    self.logger.info('Adding %s to printers list' % pi)
                    pi.start()
                    if self.platform_warnings_enabled:
                        for i, warning in enumerate(self.warnings):
                            pi.register_error(7000 + i, warning, job_fail=False, disconnect=False)
                    currently_connected_usb_info.append(pi.usb_info)
                    with self.printer_interface_lock:
                        self.printer_interfaces.append(pi)

    def close_module(self, state, closing_function, *args):
        self.logger.info(state)
        self.closing_status.append(state)
        closing_function(*args)
        self.closing_status[-1] += 'done'
        time.sleep(0.1)

    def register_error(self, code, message, job_fail=False, info=False, disconnect=False):
        self.logger.warning("Error:N%d in child of app. %s" % (code, message))

    def raise_stop_flag(self):
        self.stop_flag = True

    def set_offline_mode(self, enabled=True):
        with self.printer_interface_lock:
            for pi in self.printer_interfaces:
                pi.offline_mode = enabled
        self.offline_mode = enabled

    def get_for_platfrom_flaws(self, print=True):
        flaws = []
        if 'Pi 3' in platforms.MACHINE and platforms.ARCH == 'aarch64':
            flaws.append(self.RPI3_AND_AARCH64_WARNING)
            self.logger.warning(self.RPI3_AND_AARCH64_WARNING)
        return flaws

    def start_host_commands_interface(self):
        self.host_commands_interface = HostCommandsInterface(self, self.HOST_COMMAND_HACK_PRINTER_ID,
                                      config.get_settings()['printer_loop_period'],
                                      self.offline_mode)
        self.host_commands_interface.start()
        self.logger.info("Host commands interface enabled") 

    def stop_host_commands_interface(self):
        if self.host_commands_interface:
            self.host_commands_interface.close()
            self.host_commands_interface.join(self.min_loop_time)
            self.host_commands_interface = None
            self.logger.info("Host commands interface disabled") 

    @log.log_exception
    def quit(self): # TODO refactor all the closing by creating class Closable and subclasses for each case
        self.logger.info("Starting exit sequence...")
        if hasattr(self, 'client_detector'):
            self.close_module('Closing client detector...', self.client_scanner.close)
        if getattr(self, 'gpio_interface', None):
            self.close_module('Closing GPIO interface...', self.gpio_interface.close)
        printer_interfaces = getattr(self, "printer_interfaces", [])
        self.host_commands_enabled = False
        if self.host_commands_interface:
            self.stop_host_commands_interface()
        for pi in printer_interfaces:
            printer_name = pi.printer_profile.get('name', 'nameless printer')
            state = 'Closing ' + printer_name + ' ' + str(pi) + '...'
            self.close_module(state, pi.close)
        for pi in printer_interfaces:
            printer_name = pi.printer_profile.get('name', 'nameless printer')
            state = 'Joining ' + printer_name + ' ' + str(pi) + '...'
            self.close_module(state, pi.join, self.QUIT_THREAD_JOIN_TIMEOUT)
        if hasattr(self, 'camera_controller'):
            self.close_module('Closing camera...', self.camera_controller.stop_camera_process)
        if hasattr(self, "plugin_controller"):
            self.close_module('Closing Plugins...', self.plugin_controller.close)
        if hasattr(self, 'tray_controller'):
            self.close_module('Closing tray subprocess...', self.tray_controller.close)
        time.sleep(0.2)  # need to reduce logging spam
        if hasattr(self, "web_interface"):
            self.close_module("Closing web server...", self.web_interface.close)
        if hasattr(self, "qt_interface"):
            self.close_module("Closing Qt interface...", self.qt_interface.close)
        # go through all existing threads and try to close lost ones
        for thread in threading.enumerate():
            if thread.is_alive:
                close_method = getattr(thread, "close", None)
                if close_method:
                    close_method()
                else:
                    thread.stop_flag = True #noqa #pyright: ignore
        self.logger.info("...exit sequence finish.")
        if getattr(self, "restart_flag", False):
            self.logger.info("Restart !")
        else:
            self.logger.info("Goodbye ;-)")
        for handler in self.logger.handlers:
            try:
                handler.flush()
            except:
                pass
        if getattr(self, "poweroff_flag", False) and self.settings['quit']['allow_poweroff'] :
            if rights and rights.is_sudo_available():
                if config.get_settings()['quit']['dim_display'] and platforms.get_platform() == 'rpi':
                    try:
                        subprocess.call('sudo bash -c "echo 1 > /sys/class/backlight/rpi_backlight/bl_power"', shell=True)
                    except:
                        pass
                if self.restart_flag:
                    try:
                        subprocess.call(["sudo", "systemctl", "reboot"])
                    except:
                        pass
                else:
                    try:
                        subprocess.call(["sudo", "systemctl", "poweroff"])
                    except:
                        pass
                time.sleep(1)
